Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Fort Lauderdale?
Panel replacement in Fort Lauderdale typically costs $250 to $500 for a single panel, including parts and labor. Most homeowners pay around $350 for a standard steel panel on a single-car door, and the work is usually completed in one visit. If multiple panels are damaged, the price rises accordingly, but a single-panel replacement is one of the more affordable garage door repairs you’ll face.
What you actually pay depends on the panel material, the door brand, whether the panel needs custom color matching, and how quickly you need the work done. At Bramwell Garage Doors Fort Lauderdale, you’ll get a written price before any work starts, so the number you hear on the phone is the number on the invoice. Call (754) 701-2440 for a free estimate.
Key takeaways:
- Single panel replacement in Fort Lauderdale: $250 – $500
- Labor accounts for roughly 40 – 50% of the total
- Steel panels cost less than wood, vinyl, or custom-color options
- Most panel replacements take 1 – 2 hours on site
- Replacing a panel is almost always cheaper than a full door replacement, which runs $700 – $2,200
If you’re weighing repair against replacement, browse our Panel Replacement in Fort Lauderdale service page for a fuller picture of how the job works from start to finish.
Panel Replacement Cost Breakdown (2026)
Here’s what a panel replacement job looks like line by line in the Fort Lauderdale market. These are the ranges we quote from, written out so you know what to expect before anyone touches your door.
| Cost Component | Typical Range | Notes |
|---|---|---|
| Single steel panel (standard size) | $90 – $180 | Most common material; galvanized steel |
| Custom-color or wood-grain panel | $150 – $300 | Color matching adds cost |
| Labor (removal, install, alignment) | $100 – $220 | Typically 1 – 2 hours on site |
| Reinforcement strut (if needed) | $30 – $70 | Common on hurricane-rated doors |
| Weather seal replacement | $8 – $25 | Often recommended while panel is off |
| Total typical job | $250 – $500 | Parts and labor included |
What moves you toward the high end? A wood-look panel on a Wayne Dalton or Clopay door, a panel on a double-wide door, or damage that also bent the adjacent track. What moves you down? A standard raised-panel steel door on a single-car garage, especially if the panel is still in production and no custom paint match is needed.
The labor number is where shady operators play games. Some companies quote a low panel price and then pad the labor once they’re in your driveway. The Kingswell Guarantee exists for exactly that reason. At Bramwell, you get a written price before any work starts, and the technician who shows up is the one who honors it. No door-step price changes, no “discovered damage” upcharges. That’s been the standard since 2001.
What Affects Panel Replacement Pricing in Fort Lauderdale
Fort Lauderdale isn’t like other markets. Salt air, hurricane codes, and humidity all shape what a panel replacement costs here. Here are the factors that actually move your price:
- Panel material. Steel is cheapest at $90 – $180 per panel. Vinyl and fiberglass run higher. Real wood, which some older Florida homes still have, is the most expensive to source and match, often pushing a single panel past $400.
- Door brand and age. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor all have different panel designs. If your door is over 10 years old, the exact panel may be discontinued, which means a custom-order or retrofitted panel adds $50 – $150 to the job.
- Hurricane bracing and wind-load requirements. Fort Lauderdale sits in a high-velocity hurricane zone. Many doors here have internal reinforcement struts. If the strut inside your damaged panel is bent or compromised, it needs to be replaced too, adding $30 – $70 to the job. Skipping this isn’t an option if you want the door to survive the next named storm.
- Panel count. One damaged panel is a $250 – $500 fix. Three damaged panels on a double door can approach the cost of a new door installation ($700 – $2,200). We’ll tell you honestly if replacement makes more sense than repair, because padding a repair bill isn’t how we work.
- Color matching. A factory-color panel is priced at the standard rate. But if your door has faded in the Florida sun, a brand-new panel will stand out unless we color-match it. That process adds $50 – $120 depending on the finish.
- Access and door weight. Some Fort Lauderdale homes, especially in neighborhoods like Victoria Park and Rio Vista, have older garages with tight clearances or heavy 16-foot doors that need extra hands. That can push labor slightly higher, but we quote it upfront, in writing.
One thing that should never affect your price is whether the technician feels like upselling you that day. We quote a panel at the price we write down, and that’s the price you pay. Every time.
Is It Cheaper to Repair or Replace the Whole Door?
For a single damaged panel, repair is almost always cheaper. A single panel runs $250 – $500. A brand-new door installation in Fort Lauderdale runs $700 – $2,200. So unless your door is 15-plus years old, has rusted tracks, weakened springs, and multiple failing panels, replacing a single panel makes more sense.
Here’s the practical math. If you have one dented panel on a 7-year-old Clopay door, spend the $350 and keep the door. If you’re looking at a 16-year-old door with two damaged panels, a tired torsion spring, and rollers that screech every time the door moves, putting $1,000 into incremental repairs is a poor investment when a new door runs $1,200 – $1,800. We’ll walk you through both prices and let you decide. That’s the Kingswell Way: say the price before the work, show up in the window, leave the place cleaner than we found it, put the guarantee in writing, come back if it fails.
How to Save on Panel Replacement
Saving money on panel replacement isn’t about finding the cheapest quote on the internet. It’s about avoiding rework, avoiding do-it-yourself mistakes, and making the repair last. Here’s what actually keeps cost down:
- Act fast after damage. A small dent in a panel often stays a one-panel job. Wait a month, and the misaligned panel can stress the hinges, pull the track out of alignment, and turn a $300 fix into a $600 repair. Track realignment alone runs $120 – $240.
- Don’t DIY this one. Garage doors carry tension, and the torsion spring, which is the heavy coil mounted above the door that handles most of the lifting weight, stores enough energy to cause serious injury. A panel that’s installed slightly off-center will bind on the track and wear out rollers prematurely. Roller replacement runs $110 – $220. Pay the labor once, not twice.
- Ask about the guarantee before you book. The 365-Day Done Right Promise means if the panel or the workmanship fails within a year, Bramwell comes back and fixes it at no charge. That commitment is in writing, not just said at the door. A cheap repair with no guarantee is the most expensive repair you’ll ever buy.
- Bundle small fixes while the panel is off. If your weather seal is crumbling or your rollers are noisy, doing those jobs while the panel is already removed saves a second trip charge. We’ll tell you what we see and give you prices, you decide what’s worth doing.
- Get a real quote over the phone. Call (754) 701-2440, describe the damage, and we’ll give you a realistic range before anyone drives out. Estimates are free, and a live person answers the phone 24 hours a day, 7 days a week, including nights, weekends, and holidays. No voicemail tree, no next-business-day callback.
What Happens During a Panel Replacement Visit
Here’s the step-by-step of how a panel replacement works with Bramwell, so you know exactly what to expect when the technician arrives.
- You call and describe the damage. A live person answers, asks about your door brand, panel type, and the extent of the damage, and gives you a price range over the phone.
- We schedule a real arrival window. You get a stated window, not a four-hour “sometime today.” The technician arrives in a uniform, in a marked vehicle, and you know exactly who’s pulling into the driveway.
- The technician inspects the door. We check the panel, hinges, track alignment, spring tension, and cable condition. You get an itemized written price for the panel replacement and any recommended work, before any work starts.
- You approve the written price. No work begins until you sign off. The number on the paper is the number on the invoice. Period.
- The panel is replaced. The old panel comes off, the new panel goes on, and it’s aligned so the door sits square on both tracks. If the door binds or scrapes, we adjust it right then, not later.
- The job site is cleaned. Old panel, packaging, stray hardware. We leave the garage floor cleaner than we found it.
- You get the guarantee in writing. The 365-Day Done Right Promise covers the workmanship and the panel for a full year. If it fails, we come back at no charge. That’s a free second visit inside the guarantee period, and it’s in writing on every job.
This is the Kingswell Way, and it’s been the operating standard since 2001. Each Bramwell location is independently owned and operated, and every one has agreed to uphold the same four promises: a written price, a real arrival window, a clean job site, and a written guarantee.
Why Fort Lauderdale Homeowners Choose Bramwell for Panel Replacement
Fort Lauderdale has no shortage of garage door companies. Most of them answer the phone. Some of them even show up. Where homeowners get burned is the gap between the quote and the invoice, and the repair that quietly fails six weeks later. That’s the exact problem Bramwell was built to solve.
We’re a Kingswell company, and the Kingswell standard isn’t a marketing slogan. It’s a set of promises that go on paper with every job:
- Written price before any work starts. On every job, without exception. The price the technician writes down is the price you pay, even if the job takes longer than expected.
- 365-Day Done Right Promise. If the panel or the workmanship fails within a year, we come back and fix it at no charge. Free second visit, in writing, every time.
- Background-checked, uniformed technicians. You know who’s coming to your home before they arrive. No subcontractors, no day laborers, no surprises.
- A live person answers the phone, 24/7. Nights, weekends, holidays. If your door is stuck open at 11 p.m. in Plantation or Davie, a human answers.
- Authorized service for all major brands. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We’ve seen these doors in every condition the Florida climate can produce.
Led by Marcus Ellery, Bramwell Garage Doors Fort Lauderdale serves homeowners across Broward County, from Las Olas and Tarpon River to Wilton Manors, Oakland Park, and beyond. If you live near the beach and your door hardware is rusting faster than your neighbor’s inland, that’s the salt air. We see it every day and we know which panels and finishes hold up.
How Fort Lauderdale’s Climate Affects Your Garage Door Panels
Salt air corrodes steel. That’s a fact of life in Fort Lauderdale, and it’s why panel damage here often starts as a small rust blister near the bottom edge of the panel, where water pools after a rain. In neighborhoods close to the Intracoastal, like Victoria Park or Coral Ridge, we replace panels that have rusted through from the inside out, which is why we recommend galvanized steel or a factory-coated finish when a replacement panel is ordered.
Humidity also flexes wood doors. The expansion and contraction cycle loosens joints and cracks paint, letting moisture into the wood core. If your home has an original wood garage door, a panel replacement will cost more, but waiting will cost even more, because rot spreads through a panel fast once moisture gets in.
Hurricane season adds one more consideration. A panel that’s dented or weakened before a storm is a panel that fails during one. Fort Lauderdale’s building code requires wind-load-rated doors in most residential structures. If your damaged panel is on a wind-rated door, the replacement panel needs to meet the same rating. That’s standard practice for us, and it’s reflected in the price ranges above.
Common Panel Replacement Scenarios and Their Costs
Every damaged panel is different, but these are the situations we see most often across Fort Lauderdale, with the price ranges we typically quote:
- Reversed-into-the-door dent on a standard steel panel. The classic. One panel, a few hours, $280 – $400 out the door. If the panel is stamped steel and still in production, this is usually the cheapest repair scenario.
- Storm debris damage on a double-door panel. A branch or flying debris hits one panel on a 16-foot door. Same panel price as a single door, but labor is slightly higher. Expect $320 – $480.
- Bottom panel rust-out near the coast. Common in beachside neighborhoods. Replacement panel plus new weather seal, $300 – $450. If the rust has spread to the track, add $120 – $240 for realignment.
- Bent panel from a garage door that jumped the track. The panel bent when the door came off its track, often because the cable snapped. Cable repair runs $130 – $250, and the panel job runs $250 – $400. Combined, expect $400 – $600 depending on cable and track condition.
- Custom wood-look panel on a Clopay or Wayne Dalton door. Factory-matching a decorative panel is pricier. $380 – $500 is typical, higher if the finish needs custom matching.
FAQs – Panel Replacement Cost
How much does a single garage door panel replacement cost in Fort Lauderdale?
Plan on $250 – $500 for a single panel replacement in Fort Lauderdale, including parts and labor. Steel panels on standard doors sit at the lower end, while custom wood-look or color-matched panels approach $500. Call (754) 701-2440 for an exact quote, estimates are free.
Is it cheaper to repair a garage door panel or replace the whole door?
Repair is cheaper in most cases. A single panel replacement costs $250 – $500, while a new door installation runs $700 – $2,200. Replacement only makes sense if the door is 15-plus years old or has multiple damaged panels, failing springs, and worn tracks. We’ll give you both prices in writing and let you decide.
Can a dented garage door panel be repaired without replacing it?
Small dents in steel panels can sometimes be pushed out, but paint cracks and creases in the metal usually leave the panel structurally weakened. In a hurricane zone like Fort Lauderdale, a weakened panel is a liability. Most dents that can’t be fixed with basic metal work warrant a replacement at $250 – $500. We’ll assess it honestly and tell you if a repair is viable.
Can you replace a garage door panel the same day?
Yes, if the panel is in stock locally or at a supplier. Many standard steel panels are available same-day in the Fort Lauderdale area, which means the job can be done in one visit. Custom or discontinued panels take 5 – 10 business days to order. Call (754) 701-2440 and we’ll check availability while you’re on the phone.
Does the 365-Day Done Right Promise cover panel replacement?
Yes. The 365-Day Done Right Promise covers both the panel and the workmanship for a full year. If the panel fails or the installation causes a problem within 365 days, Bramwell returns and fixes it at no charge. That free second visit is in writing, on every job, without exception.
How much does labor cost for garage door panel replacement?
Labor for panel replacement in Fort Lauderdale runs $100 – $220. That covers removing the old panel, installing the new one, aligning the door on the tracks, and testing the full open/close cycle. It’s typically one to two hours of on-site work. The labor is quoted upfront in your written price, so there are no surprises on the invoice.
If you have a question we didn’t cover here, call us. A live person answers, day or night, and we’ll talk through your specific door and damage. That’s (754) 701-2440.
Get a Free Estimate for Panel Replacement in Fort Lauderdale
You don’t have to guess what your panel replacement will cost, and you shouldn’t have to gamble on whether the company that quotes you will actually honor the price. Call Bramwell Garage Doors Fort Lauderdale at (754) 701-2440 and you’ll get a straight answer from a live person, a free estimate, and a written price before any work begins.
We serve the entire Fort Lauderdale area, from home garages in Tarpon River and Sailboat Bend to communities across Broward County. Led by Marcus Ellery, our team has been working to the Kingswell standard since 2001: written price, real arrival window, clean job site, written guarantee. Every job. No exceptions.
If your panel is dented, rusted, or cracked, call before it gets worse. Door damage has a way of spreading, and what’s a $300 panel today can become a $1,200 replacement by next season. Get the number to beat, in writing, today.
Pricing reflects the Fort Lauderdale market as of 2026. Bramwell Garage Doors Fort Lauderdale offers free estimates – call (754) 701-2440.
What Our Customers Say
"Spring snapped on a Sunday and the door was stuck half open with my car trapped inside. Called Bramwell and they had someone out that afternoon. Price he quoted on the phone was the price I paid, no games. Door runs quieter now than it has in years."
- Mike R."Door was loud enough to wake the neighbors. First visit quieted it but it crept back after a week, so they came out again and dialed it in for free. Second time did the trick."
- Darren Figueroa"Came home to the door stuck a foot off the ground. They squeezed me in the same afternoon, got it back on track, and explained how to avoid it next time. Fair and fast."
- Lucille Hammond