Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGenie Garage Door Spring Repair in Fort Lauderdale: What to Know First
Genie garage door spring repair in Fort Lauderdale typically runs $180 – $340 for a torsion spring replacement, parts and labor included, and most jobs are completed the same day we diagnose them. That’s the honest range we quote before we touch a single bolt. If you own a Genie opener and your door suddenly won’t lift, or one side sags and groans, you’re likely dealing with a broken spring, not a dead motor. Call (754) 701-2440 and we’ll walk you through what we’re hearing, then give you a written price before any work starts.
This page is for Fort Lauderdale homeowners with Genie-brand garage door systems, whether the opener says IntelliG, PowerLift, ReliaG, or QuietLift. We service every Genie model line and the springs that do the actual lifting beneath them.
How Genie Products Fail – and How We Fix Them
- IntelliG and PowerLift systems wear torsion springs faster in coastal air. Fort Lauderdale’s salt humidity corrodes the spring’s outer coating, which leads to micro-fractures along the coil. We see this on doors within three miles of the Intracoastal more than anywhere else. The fix is a corrosion-rated replacement spring, not a repaint of the old one.
- ReliaG and QuietLift openers mask a broken spring until the motor burns out. These Genie openers are strong enough to drag a door open for a few weeks after a spring snaps. Homeowners don’t notice until the opener smells hot or starts tripping its thermal cutoff. When we arrive, we check the spring first, not the motor. Replacing the spring for $180 – $340 usually saves the opener entirely.
- Extension springs on older Genie screw-drive retrofits stretch unevenly. Some Fort Lauderdale homes still run Genie screw-drive openers from the early 2000s, often paired with side-mounted extension springs. One spring stretches a quarter inch longer than its partner, and the door starts climbing crooked. We replace both springs as a set, never one, and rebalance the door to spec.
- The Genie Safe-T-Beam system will refuse to close when spring tension drops. Genie’s safety sensors are more sensitive to door imbalance than other brands. If the spring weakens and the door drifts, the sensors trip and the door reverses for no obvious reason. We’ve had customers replace sensors twice before calling us. It’s usually the spring losing tension, and a spring adjustment or replacement clears the fault.
- Garage door spring repair on Genie units with original builder springs often fails within a year. Many Fort Lauderdale homes were built with inexpensive 10,000-cycle springs, regardless of opener brand. Genie’s warranty covers the opener, not the spring. We install higher-cycle springs rated for 25,000 to 30,000 cycles, which in a climate that sees daily use means roughly seven to eight years of life instead of two or three.
Styles & brands we work with






Our Genie Garage Door Spring Repair Process
- 1
You call, a live person answers. No phone tree. You describe what the door is doing, and we ask the questions that matter: which side sags, whether it reverses, what the opener sounds like.
- 2
We arrive in the window we gave you. A uniformed technician shows up, and the first step is always the same: we inspect the full system, not just the spring. A broken torsion spring is obvious, but a worn cable or a failing bearing can be the reason the spring snapped in the first place.
- 3
We present a written price. Before any work starts, you’ll see exactly what the repair costs, parts and labor. If we find something else during the job, we stop and tell you first. The invoice number matches the quote number.
- 4
We install the right spring. On Genie doors, we match spring size to the door’s weight and cycle rating, not just the old spring’s dimensions. OEM Genie springs and quality aftermarket equivalents both work, and we’ll tell you the honest trade-off for your door and your budget.
- 5
We test the door six ways. Balance at mid-travel, reversal force, Safe-T-Beam function, noise, speed, and open-close symmetry. We adjust until the Genie opener runs without strain.
- 6
We leave the site clean and put the guarantee in writing. Every repair carries the 365-Day Done Right Promise. If it fails inside a year, we come back and fix it at no charge.
What Genie Garage Door Spring Repair Costs in Fort Lauderdale
Here’s what you should expect to pay in Fort Lauderdale for the most common Genie spring repairs:
- Single torsion spring replacement: $180 – $280
- Double torsion spring replacement (doors over 10 feet wide): $260 – $340
- Extension spring pair replacement: $180 – $280
- Spring adjustment or rebalance (no replacement): $120 – $180
- Safety cable installation (for extension spring doors): $85 – $130
What moves the price: door weight, spring cycle rating, whether we need to replace both springs versus one, and whether the door needs a full rebalance afterward. A 16-foot Fort Lauderdale double door costs more than a 7-foot single, plain and simple. Every quote is a written price before work begins, and every repair comes with a written guarantee. Call (754) 701-2440 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhy Fort Lauderdale Homeowners Call Bramwell Garage Doors Fort Lauderdale for Genie Work
We’re an independent Genie service provider, which means we’re not tied to manufacturer pricing or scripted service calls. What we are tied to is the Kingswell Guarantee: a written price before any work starts, a real arrival window that we actually keep, a clean job site when we leave, and a written guarantee on every repair. That’s been our standard since 2001. Marcus Ellery runs our Fort Lauderdale crew, and he built the team around one simple rule: quote the cost, fix it right, and leave the driveway cleaner than it was when we pulled in.
Most of our calls are for springs, but we also service LiftMaster and Chamberlain openers, so we can diagnose the whole system without punting to another company. If your Genie opener is fine and the spring is the problem, we’ll tell you that and fix only the spring. If the opener has been dragging a dead spring for weeks and the motor’s now tired, we’ll show you the proof and give you options, not a lecture.
Tell me what it’s doing wrong, and we’ll figure out the rest from there.
FAQs
No. The spring is a separate component from the Genie opener, and replacing the spring does not void the opener’s warranty. The spring itself is a wear item and is generally not covered by Genie’s opener warranty once it’s outside the original installation coverage. As an independent Genie service provider, we always match the replacement to the door’s weight and cycle requirements so the opener never strains against an incorrectly sized spring.
Call (754) 701-2440 and we’ll check your specific model and spring set for free.
Most Genie torsion and extension spring replacements in Fort Lauderdale are completed the same day, and we carry common Genie-compatible spring sizes on our trucks. If your spring is a nonstandard size, we can usually source it same day from a local supplier. Call (754) 701-2440, describe what the door is doing, and we’ll give you a realistic arrival window before you hang up.
If the door itself is structurally sound, panels aren’t cracked or rusted through, and the tracks are straight, a spring replacement is almost always the right call and costs $180 – $340. If the door is 15-plus years old, rusted along the bottom panel (we see this a lot in Fort Lauderdale’s salt air), or already has a history of multiple repairs, a full replacement at $700 – $2,200 might be cheaper over five years. We’ll show you both numbers in writing and let you decide without pressure.
No. The written price we give you before any work begins is the price you pay at the end. If we uncover something else while we’re in there, like a frayed cable or a bent track, we stop, show you the issue, and give you a new written price for the additional work. You approve it first. That’s the Kingswell Way, and it’s been our operating standard since 2001.
Both, and we’ll tell you the difference honestly. Genie OEM springs are manufactured to factory spec and work fine. Quality aftermarket springs from trusted suppliers often use the same wire grade and can offer higher cycle ratings at a similar price. The critical part isn’t the brand stamp, it’s matching the spring’s dimensions and cycle rating to your door’s weight. We do that calculation on every job and show you the math if you want to see it.
Call Bramwell Garage Doors Fort Lauderdale for Genie Spring Repair
If your Genie door won’t open, opens crooked, or reverses for no reason, call (754) 701-2440. A live person answers 24/7, we’ll schedule you a real arrival window, and you’ll get a written price before any work begins. Every repair is backed by the 365-Day Done Right Promise and the written Kingswell Guarantee. If it fails inside a year, we come back and fix it at no charge.
Written by Marcus Ellery, Owner, Bramwell Garage Doors Fort Lauderdale, serving Fort Lauderdale and nearby areas.